What aspects does our clinic's Onda Lifting treatment focus on?

1. Customized Design and Handpiece Utilization Strategy Before Treatment

Before the treatment, the medical staff thoroughly assesses the lifting areas and parts requiring contour improvement. Based on this, the 3mm and 7mm handpieces are appropriately selected and applied. Areas prone to cheek hollowness are carefully avoided, while areas requiring elasticity improvement are treated with focused attention.

2. Appropriate Energy Application

Energy is adjusted up to a maximum of 120,000 joules for the face, tailored to each individual's skin condition and treatment goals. Rather than simply applying a large amount of energy, a treatment plan is established in the most suitable way for the patient.

3. Precise Speed Control

During Onda treatment, the pattern of heat delivery varies depending on the handpiece speed. The medical staff adjusts the speed slowly for areas requiring heat accumulation and quickly for sensitive areas, preventing overheating and delivering energy to the target area to maximize treatment efficacy.

4. Customized Shot Distribution by Area

Beyond just using 3mm and 7mm handpieces, the number of shots is meticulously distributed, taking into account the patient's facial volume and fat distribution. For example, if there is less fat, the 3mm handpiece is primarily used, while for cases with a double chin or more fat in the lower face, the proportion of the 7mm handpiece can be increased.

Characteristics of Onda Lifting Treatment Method

Instead of performing Onda Lifting treatment solely at 90W from the beginning, our medical staff applies a method of rapidly raising the temperature with a high output of 100-110W initially, and then maintaining it at 90W.

Differences in Our Clinic's Treatment Method

Faster Reaction Time:

Even when delivering the same total energy, starting the treatment with high output tends to raise tissue temperature more quickly.

This can help shorten the time it takes to reach the energy accumulation zone,

and is expected to accelerate the point at which the skin begins to respond to the treatment.

Increased Energy Efficiency in Core Reaction Areas:

When high output is applied for a short duration, the required temperature can be reached before heat disperses to surrounding tissues.

This can help reduce epidermal stimulation while inducing reactions primarily in the dermis and fat layers.

Efficient Treatment Time Management:

A 90W standalone treatment may take more time to reach the reaction zone,

and there is a possibility that more shots may be required to achieve a sufficient thermal response.

In contrast, starting with high output delivers the necessary thermal energy in a shorter time,

and subsequent power adjustments can ensure treatment stability.

What Patients Can Expect After Treatment:

This treatment method can help patients feel the lifting effect more quickly.

Patients can expect to experience a feeling of skin tightening immediately after the procedure.

Furthermore, because the output is adjusted to prevent heat sensation from rising above a certain level,

it can help reduce excessive pain or discomfort during the treatment.

The medical staff strives for patient comfort during the treatment by considering these points.

Consequently, even when using the same 60,000 joules of energy,

treatment results can vary depending on the power control method.

The medical staff is committed to achieving satisfactory results based on this treatment expertise.

Key Features of Onda Lifting

Simultaneous Lifting and Tightening Management

Onda Lifting uses 2.45GHz ultra-high frequency microwaves to deliver heat to the dermis and subcutaneous fat layers. Through this, it is a treatment that can simultaneously expect lifting and tightening effects. It utilizes the principle of vibrating water molecules to generate frictional heat, inducing collagen contraction and production, as well as fat cell reduction. A key feature is that immediate lifting effects can also be experienced. Microwaves have the property of being absorbed by water in the skin to generate heat. This helps deliver energy effectively and selectively to the dermis and subcutaneous fat layers while minimizing epidermal stimulation. Onda is characterized by its ability to manage both lifting and tightening with a single device.

본 클리닉 시술 방식의 차이점

빠른 반응 도달 시간:

동일한 총 에너지를 조사하더라도, 고출력으로 시술을 시작하면 조직 온도가 더 빠르게 상승하는 경향이 있습니다.

이는 에너지 누적 구간에 도달하는 시간을 단축하는 데 도움이 될 수 있으며,

피부가 시술에 반응하기 시작하는 시점을 앞당길 수 있을 것으로 기대됩니다.

핵심 반응 부위의 에너지 효율성 증대:

고출력을 짧은 시간 동안 조사하면 열이 주변 조직으로 퍼지기 전에 필요한 온도에 도달할 수 있습니다.

이로 인해 표피 자극을 줄이면서도 진피와 지방층 중심의 반응을 이끌어내는 데 도움을 줄 수 있습니다.

효율적인 시술 시간 관리:

90W 단독 시술은 반응 구간까지 도달하는 데 더 많은 시간이 소요될 수 있으며,

충분한 열반응을 얻기 위해 더 많은 샷을 조사해야 할 가능성도 있습니다.

반면, 고출력으로 시작하는 방식은 짧은 시간 안에 필요한 열 에너지를 전달하며,

이후 출력 조절을 통해 시술의 안정성을 고려할 수 있습니다.

환자분들이 시술 후 체감할 수 있는 점:

이러한 시술 방식은 리프팅 효과를 좀 더 빠르게 느끼는 데 도움이 될 수 있습니다.

시술 직후 피부가 탄탄하게 조여드는 느낌을 경험하실 수 있을 것으로 기대됩니다.

또한, 열감이 일정 수준 이상으로 올라가지 않도록 출력을 조절하기 때문에,

시술 중 과도한 통증이나 불편감을 줄이는 데 도움을 줄 수 있습니다.

의료진은 이러한 점들을 고려하여 시술 과정의 편안함을 위해 노력합니다.

결과적으로, 같은 6만 줄의 에너지를 사용하더라도 출력 조절 방식에 따라

시술 결과는 다르게 나타날 수 있습니다.

의료진은 이러한 시술 노하우를 바탕으로 만족스러운 결과를 위해 노력하고 있습니다.

온다리프팅의 주요 특징

리프팅과 타이트닝 관리 동시 진행

온다리프팅은 2.45GHz 극초단파 마이크로웨이브를 사용하여 진피와 피하지방층에 열을 전달합니다. 이를 통해 리프팅 및 타이트닝 효과를 동시에 기대해 볼 수 있는 시술입니다.

수분을 진동시켜 마찰열을 발생시키는 원리를 활용하며, 콜라겐의 수축과 생성, 지방세포 감소 등을 유도합니다. 이로 인해 즉각적인 리프팅 효과 또한 경험할 수 있다는 점이 특징입니다.

마이크로웨이브는 피부 속 수분에 흡수되어 열을 생성하는 성질이 있습니다. 이는 표피의 자극을 줄이면서도 진피 및 피하지방층에 선택적으로 에너지를 효과적으로 전달할 수 있도록 돕습니다.

온다는 하나의 장비로 리프팅과 타이트닝을 함께 관리할 수 있는 점이 특징으로 꼽힙니다.

Generally, lifting focuses on improving facial contours, while tightening emphasizes enhancing skin texture and elasticity. Onda treatment is designed to address both of these elements simultaneously.

Key Principles of Onda Lifting

Onda Lifting uses two types of handpieces: 3mm and 7mm.

The 3mm handpiece is used to deliver energy to the boundary between the dermis and subcutaneous fat.

When heat is delivered to this area, it stimulates the production of collagen and elastin fibers, promotes hyaluronic acid synthesis, and causes existing collagen to contract. This can lead to a skin tightening effect.

In areas with edematous fat, water drainage can occur, potentially leading to immediate contour changes.

The 7mm handpiece reaches deeper into the subcutaneous fat layer, selectively damaging fat cell membranes and inducing cell death.

Damaged fat cells are expelled from the body through the lymphatic system, which can lead to a refined facial contour. Changes typically begin to appear 2-3 weeks after treatment, with contour changes noticeable around 4 weeks, and more pronounced effects around 6 weeks. Since dead fat cells do not regenerate, the results can be relatively long-lasting.

Additionally, immediate contraction of the retaining ligaments can occur, contributing to a lifting effect.

Temperature Control: Collagen in the dermal layer is most effectively contracted at temperatures around 60-65 degrees Celsius. To maintain this temperature, a skilled treatment process is crucial, involving moving the handpiece at a consistent speed to accumulate sufficient heat within the skin.

Water-Selective Absorption Principle: Onda's microwave energy has the characteristic of being primarily absorbed by water. Thanks to this, it delivers heat intensively only to the water content in fat cells and the dermal layer, with minimal stimulation to nerves or blood vessels. Consequently, this can help reduce pain during treatment and lower the risk of side effects.

Other Lifting Treatments to Consider

While Onda Lifting can be performed alone, combining it with other treatments such as Shurink (targeting the fascial layer) or Oligio (radiofrequency tightening) can yield better synergistic effects.

Especially when multiple treatments are performed on the same day, the total time required for heat accumulation is reduced, allowing for more efficient procedures and potentially increasing satisfaction with the results.

Our Medical Team's Treatment Philosophy

We have extensive experience with Onda Lifting treatments.

However, we emphasize personalized lifting designs, considering the unique facial characteristics of each patient.

Even after treatment, we continuously strive and research for better results.

This is because we believe that true lifting treatment goes beyond simply operating a device; it involves a deep understanding of skin characteristics and facial contours to achieve natural and harmonious changes.

For Onda Lifting, the delicate touch and experience of the practitioner are as important as the device's performance.

When combined with the delicate touch and strategic approach of experienced medical professionals, the effectiveness of Onda Lifting can be further enhanced.

Why Onda Lifting Shows Immediate Effects

Onda Lifting utilizes microwave energy to selectively concentrate heat at depths of 3mm and 7mm within the skin.

At this point, collagen fibers heated to temperatures above 65 degrees Celsius immediately contract.

As a result, you can experience a certain degree of lifting effect immediately after the treatment.

Traditional radiofrequency lifting typically shows gradual changes.

Onda Lifting is characterized by the ability to feel immediate skin elasticity and lifting effects right after the treatment.

This can be a suitable treatment for those who desire rapid changes.

Distinctive Features of Onda Lifting Treatment

1. Customized Design and Handpiece Strategy Before Treatment

We emphasize meticulous design planning before Onda Lifting treatment.

Our medical staff conducts direct consultations to comprehensively analyze the patient's skin elasticity, fat distribution, facial volume, and the direction where lifting is needed, then plans the treatment areas accordingly.

Based on this, the 3mm handpiece (dermal layer stimulation) and 7mm handpiece (fat layer target) are appropriately applied according to the specific characteristics of each area.

Beyond simply using the device, lifting treatment is performed in a strategic manner that emphasizes design.

2. Sufficient Energy Delivery and Precise Settings

For effective Onda Lifting, the regulation of the total energy amount is crucial.

Customized treatment is possible with energy levels ranging from 60,000 joules to over 120,000 joules, tailored to individual conditions. Accordingly, cooling strategies to prevent overheating are also meticulously planned, along with ensuring an appropriate treatment duration.

3. Handpiece Speed and Heat Accumulation Control

The effectiveness of Onda treatment is closely related to the amount of heat accumulated within the skin.

During the initial phase of treatment, the handpiece is moved slowly to accumulate heat, while in the latter phase, the speed is adjusted to reduce the risk of burns.

Such delicate control over the procedure is only possible with the accumulation of extensive experience from the medical staff.

4. Customized Handpiece Distribution and Shot Strategy

When there is facial volume versus when there is merely a decrease in skin elasticity, the treatment plan must be designed differently.

We meticulously analyze the patient's facial volume, fat layer location, and skin thickness to appropriately adjust the usage ratio of 3mm and 7mm handpieces.

For example, we primarily use the 7mm handpiece for the chin area with more fat, and focus on the 3mm handpiece for the area directly below the cheekbones where concavity is a concern.

We perform treatments by applying a distribution strategy optimized for each individual patient, rather than a simple shot application method.

5. Principals' Meticulous Design and Continuous Research

Our medical team regularly performs numerous Onda Lifting procedures, thereby possessing extensive clinical experience.

However, the treatment design is customized for each patient every time.

Even outside of consultation hours, our principal doctors deeply consider the patient's facial changes and continuously research energy settings and handpiece placements that can achieve efficient results.

Anyone can perform Onda Lifting, but the expected results may vary depending on who designs and performs the procedure.

Onda Lifting is not merely a procedure using equipment; it is a lifting treatment perfected by the medical team's skilled expertise.

Recommended For

• 01. Those who want to refine their jawline due to a double chin, jowls, etc.
• 02. Those experiencing deepening nasolabial folds or overall sagging.
• 03. Those who were unsatisfied with contour or elasticity improvement after previous lifting treatments.
• 04. Individuals in their 30s to 50s experiencing a combination of fat and reduced elasticity.
• 05. Those who wish to reduce the burden of pain or recovery time during treatment.

Treatment Benefits

• 01. An excellent cooling system minimizes pain during the procedure.
• 02. Skin tightening effects can be expected after the procedure.
• 03. You can return to daily life immediately after the procedure with minimal disruption.

Treatment Process

• STEP 01. After cleansing, a 1:1 consultation with the medical staff is conducted.
• STEP 02. Carefully apply oil to the treatment area.
• STEP 03. Perform the Onda Lifting procedure.

Post-Treatment Precautions

• ㆍYou can wash your face and apply makeup immediately after the procedure.
• ㆍIt is recommended to avoid visiting saunas or jjimjilbangs (Korean bathhouses), drinking alcohol, and smoking for about 1 week after the procedure.
• ㆍDue to temporary warmth, your skin may feel dry, so please apply plenty of moisturizer.
• ㆍWhen going out, we recommend always applying sunscreen to protect your skin.