Honest treatment and precise energy delivery for InMode FX & FORMA quantitative treatment principles

InMode treatment proceeds in two ways: FX (fat breakdown) and FORMA (collagen lifting). To achieve desired results from these treatments, it is crucial to use sufficient time and energy in accordance with the set maximum output.

During FX mode treatment, the device time is maintained for at least 6 minutes, and in FORMA mode, energy values of 10K or more are applied to ensure the effectiveness of the treatment.

During treatment, we prioritize using genuine equipment to fully deliver the specified energy.

All treatments are personally performed by experienced medical staff, striving for patient safety and satisfactory results.

Know-how for maintaining optimal temperature and achieving it quickly to enhance FX mode effectiveness

InMode FX treatment requires raising the temperature of the treated area above a certain level to effectively manage fat cells.

During treatment, we focus on quickly raising and effectively maintaining the temperature while minimizing pain.

To achieve this, we meticulously adjust various factors such as output intensity, suction pressure, treatment speed, sequence, and skin reaction.

We utilize output tailored to the maximum adjustable settings. This helps in rapidly increasing the temperature of the treated area.

We extend the pulse duration (radiofrequency injection time). By increasing the time that radiofrequency energy is delivered at once, effective heat transfer deep into the skin can be expected.

In addition to real-time temperature monitoring by the InMode device, medical staff also check the temperature of the treated area with the back of their hand. This helps minimize pain and ensures a safe treatment process.

In the initial stages of treatment, we adjust the speed to ensure heat is evenly distributed across the entire skin. Subsequently, we focus on areas with more fat or areas of concern, adjusting the temperature to reduce the burden of pain while still expecting the treatment's effectiveness.

Reduced risk of cheek hollowing and maintenance of a natural face shape through delicate design

Since FX treatment selectively targets fat, the facial design process before treatment is very important.

Unplanned treatments can lead to results such as cheek hollowing. Therefore, after thorough consultation with medical staff, we carefully design areas for asymmetry improvement or specific concerns before proceeding with the treatment.

We meticulously consider each individual's face shape and fat distribution, aiming for natural yet harmonious results.

Post-treatment Swelling Management – Supporting Comfortable Recovery with Dangguisusan Prescription

After receiving InMode treatment, swelling or bruising may occasionally occur.

To reduce post-treatment discomfort and aid in quick recovery, we provide 'Dangguisusan,' a traditional Korean herbal prescription used to alleviate swelling and bruising, at no additional cost.

This helps alleviate concerns about swelling and makes returning to daily life more comfortable.

Transparent and reliable treatment process through post-treatment quantity verification

Once the treatment is complete, we directly show patients that the treatment time and energy input amount were performed according to regulations. This is part of our effort to increase treatment transparency and gain the trust of our patients.

Understanding InMode Treatment

* Radiofrequency (RF) lifting methods can be broadly divided into two types.

1. Monopolar

The monopolar method has a structure where energy is emitted from one electrode and then recovered through a pad attached to the body.

This method allows energy to be delivered deep into the skin tissue, creating a strong deep heat effect, but some individuals may experience a slight sensation of irritation.

2. Bipolar

Bipolar is characterized by energy circulating between two electrodes. Therefore, energy tends to be concentrated primarily on the skin surface and in the dermal layer.

The pain burden is relatively low, but it is known to be relatively difficult for energy to reach deep areas such as the fat layer.

* What is the principle behind InMode FX acting on the fat layer despite being a bipolar method?

As mentioned earlier, it is not easy to deliver energy deep into the fat layer with a typical bipolar method.

However, InMode FX possesses a unique structure that allows it to effectively act on the fat layer despite being a bipolar method.

The core principle lies in its vacuum suction function.

InMode FX gently suctions the skin of the treated area with a vacuum, positioning the skin and subcutaneous fat layer between the two electrodes.

When radiofrequency energy is delivered in this state, even with a bipolar method, thermal energy can effectively penetrate the fat layer.

Performing the treatment in this manner can affect fat cells at temperatures ranging from 42 to 45 degrees Celsius, inducing natural damage.

Damaged fat cells then undergo a process of being expelled from the body via the lymphatic system. Simultaneously, an effect of activated collagen production in the dermal layer can also be expected.

Consequently, two effects can be expected simultaneously: fat reduction and improved skin elasticity.

*Expected Effects of InMode FX

1. Fat Reduction Effect

InMode FX delivers consistent heat of 42-45 degrees Celsius or more to skin tissue for over 6 minutes.

These damaged fat cells release their internal contents, which can then be naturally expelled from the body through the lymphatic system.

It can primarily be considered for areas of concern with fat accumulation, such as facial cheek fat or a double chin.

2. Collagen Production and Elasticity Improvement

During the FX procedure, heat stimulation is also delivered to the dermis, promoting the activity of fibroblasts. This can induce the creation of new collagen.

Existing collagen fibers show a contraction response, giving a sensation of skin tightening, which can help with immediate elasticity improvement.

*Features and Effects of InMode Forma

InMode Forma is a radiofrequency treatment method that focuses on the dermis, a shallower area, rather than the subcutaneous fat layer.

This treatment involves gently applying the device to the skin surface to deliver heat energy of 42-43 degrees Celsius to the dermal layer.

This optimal temperature activates fibroblasts in the dermis, which can positively impact the improvement of fine lines, enlarged pores, and reduced skin elasticity.

One of Forma's features is its built-in real-time temperature sensing system. This makes it easier to maintain a stable temperature on the skin surface during treatment.

This helps to induce collagen production through consistent heat delivery while avoiding excessive heat damage to the skin.

Immediately after the treatment, you may feel a sensation of skin tightening, and collagen production can gradually occur over 2-6 weeks.

*FX and FORMA: Suitable Treatment Areas

Sagging or fat accumulation in different areas of the face occurs due to various complex reasons.

- Double Chin

A double chin can primarily appear when excessive subcutaneous fat accumulates or when the elasticity of the muscles under the chin decreases.

FX treatment delivers radiofrequency heat to the fat layer in this area, reducing fat cell activity and inducing collagen production, which can help improve the elasticity of the skin under the chin.

If you have a double chin with thin skin and reduced elasticity, Forma may also be considered as an auxiliary treatment.

- Cheek Fat Below the Cheekbones (Jowls)

This is a change in the mid-face caused by cheek fat descending with aging. By using FX to control excessive fat volume,

and adding Forma to improve skin elasticity, you can expect an improvement in facial contours.

- Cheeks/Side Cheeks

Enlarged pores, fine lines, and a rough skin texture are closely related to a decrease in collagen density in the dermis.

Forma stimulates fibroblasts through thermal energy to induce the production of collagen and elastin. This can contribute to improving the density and texture of the skin surface.

- Jawline

A blurred jawline is often primarily caused by reduced skin elasticity rather than fat issues. In such cases, Forma treatment can focus on the dermis to help promote collagen contraction and production.

If fat improvement is deemed necessary, applying FX together can lead to even more defined contour lines.

- Eye Area, Forehead, Mouth Area

These areas are prone to fine lines and are characterized by thin, sensitive skin.

Forma is considered an easy-to-apply treatment for these sensitive areas, as it can deliver the necessary stimulation to the skin even with low energy.

*InMode Treatment: Things to Consider

The satisfaction with InMode treatment results is not solely determined by merely owning the equipment.

Above all, a customized treatment plan that considers handpiece selection, depth of thermal energy delivery, total accumulated energy, and each individual's skin condition is crucial.

For example, in Forma treatment,

simply providing a warm sensation on the skin surface is unlikely to achieve sufficient collagen production.

In reality, a temperature of 42-43 degrees Celsius must be continuously maintained in the dermis for at least 10 minutes,

and when a cumulative energy of 8-12kJ or more is delivered per area, fibroblasts can be stimulated to induce collagen production.

The FX device goes beyond simply delivering high-frequency energy; it utilizes vacuum suction and thermal energy together.

To achieve fat reduction and collagen contraction, it is crucial to deliver a temperature of 42 degrees Celsius or higher deep into the skin for more than 6 minutes.

It is common to apply more than 8-15kJ of energy per treatment area, and for areas with thin skin or where bruising occurs easily, the vacuum pressure must be finely adjusted.

A synergistic effect can be expected by first targeting unwanted fat with FX treatment, followed by finishing the lifting process with FORMA.

This approach can help control post-treatment swelling and thermal reactions while also refining the overall lifting lines.

Ultimately,

When considering InMode treatment, it's crucial to consider not just the device itself, but also the medical professional's anatomical knowledge, ability to adjust device settings, and capacity for designing customized treatments.

Based on these principles, our medical institution continuously strives for satisfactory lifting results.

Even with the same InMode treatment, we do our best to increase satisfaction through a delicate approach that considers individual characteristics.

Treatment Details

Stage 1 FX combines radiofrequency energy and IRE electrical stimulation technology. This can influence from the epidermis to the SMAS layer, inducing the reduction of unwanted fat and collagen regeneration, and helping to improve facial contour lines.

Stage 2 FORMA treatment delivers thermal energy to the dermal layer, promoting collagen production. This can contribute to wrinkle improvement and enhanced skin elasticity.

All treatments are performed directly by medical professionals.

Expected Effects of Treatment

• 01. You can expect improved skin elasticity and natural firmness.
• 02. Lifting process that helps reduce unwanted fat.
• 03. Can contribute to the formation of a facial V-line through collagen regeneration and skin tightening.
• 04. Manages by influencing fat cell membranes with the delivery of 40-43°C thermal energy.
• 05. Lifting focused on improving double chin and sagging jowls.
• 06. Induces collagen, elastin, and hyaluronic acid production.
• 07. Positive synergy can be expected when performed in conjunction with Shrink treatment.

Treatment Stages

• 1. Self-cleansing
• 2. Dermal lifting using FORMA
• 3. Application of miniFX HVP energy treatment

Recommended For

• 01. Individuals concerned about facial line management due to skin aging.
• 02. Individuals concerned about double chin or sagging jowls.
• 03. Individuals expecting reduction of double chin and improvement of sagging skin.
• 04. Individuals desiring enhanced skin elasticity and overall lifting effects.